We had a very productive weekend. The big job to tackle was the Hardibacker for the floor. Previously there had been a layer of plywood that the tile was adhered to, but the cement board will be a better substrate for when we actually get around to putting tile back down. Jen took on the task of troweling out the adhesive while I followed behind and screwed down the boards. By the time I was finished with one board Jen had the next area ready to go.
It's not a comfortable job working on flooring, and it took quite a few hours. It didn't help that our tolerance were a little tight so i had to do some trimming. Cement board is a hassle to trim, especially when you're just taking off a 1/4". We laid out the screws per the recommendations and ended up using a total of about 1000 in the floor. This is when i was glad to have a power drill, rather than relying on the cordless.
We even got around to building our wall cabinets
Just a small glitch with the gluing of the corner cabinet that left the face frame a little warped. Hopefully more wood glue and clamps will solve the problem. We'll see how that turns out in the morning.
2 comments:
Your kitchen is coming on in leaps and bounds now. It's looking good.
flooring base plus cabinets... you guys are rolling now!
Post a Comment